Tandberg Data DPS Expansion Module Disk Pack Spécifications télécharger pdf (Page 63)

| 57

Drive carrier LEDs

The drive carrier modules are organized as follows:

Disk drive status is monitored by a green and an amber LEDs mounted on the front of each

drive carrier module.

The drive carrier LEDs provide the following indications:

Unless otherwise selected at installation time, all drives in the enclosure should

automatically start their motors after power is switched on. If this has not occurred there is a

power problem (an alarm and power fault indication would normally be active).

Green Amber Description

OFF OFF No drive installed.

ON / Blinking OFF Drive installed, powered on, and

operational.

ON Blinking Drive impacted or has any background

service occurring (such as initialization).

OFF ON Slot fault. There is a power fault on this

drive slot.

ON ON Drive fault. The drive is inserted but is not

communicating, which indicates a drive

failure.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68

Pas de commentaire

Tandberg Data DPS Expansion Module Disk Pack Spécifications Page 63