Tandberg Data DPS Expansion Module Disk Pack Spécifications télécharger pdf (Page 21)

Unpacking and Cabling DPS Expansion Module | 15

Installing the RAID controller modules

The XDC1200a model used with DPS1000 Series has one RAID controller module.

Install the RAID controller module as follows:

1. Check for damage, especially to the interface connector.

CAUTION

Handle the module carefully and avoid damaging the connector pins. Do not

install the module if any pins appear to be bent.

2. With the latches in the open position, slide the controller module into the lower bay

located on the right hand side of the enclosure until the latches engage.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 67 68

Pas de commentaire

Tandberg Data DPS Expansion Module Disk Pack Spécifications Page 21