Tandberg Data 2U LTO Manuel d'utilisateur télécharger pdf (Page 5)

StorageLoader 2U LTO Quick Start Guide

Page 5 of 8

Step 5 — Adding bar code labels and loading cartridges

1 — Apply bar code labels to cartridges.

2 — Press the eject button to unlock the

magazine (magazine releases and

moves a short distance out of the

library). This may take a few minutes.

3 — Pull the magazine straight out of the

library (no side-to-side or up/down

motion).

4 — Load cartridges in slots as shown.

Note: The last two slots in each magazine

are blocked.

5 — Slide the loaded magazine back into

the library. The library performs an

inventory after the magazine is installed.

Note: Refer to the Product Manual for

important information about the cleaning

slot location and the I/E port.

Step 6 — Verifying the hardware installation

1 — Download and install LibTool and LTOTool onto

your Host (select the version for your operating

system). Available at www.tandbergdata.com.

2 — Use LibTool to:

• Detect the library

• View the library’s cartridge inventory

• Move tapes into and out of the tape drive

3 — Use LTOTool to:

a. Detect the tape drive

b. Perform a Read/Write test

Note: The readme les that accompany LibTool and

LTOTool provide instructions.

EJECT

BAR CODE LABEL

CARTRIDGE

BAR CODE LABEL

ENTRY/EXIT PORT

Preparing for and Performing a Backup

Congratulations! You have successfully installed your new library! We recommend that you follow these steps:

1 — Read Exabyte’s Basic Backup Guide, which is available at: www.tandbergdata.com.

2 — Select and install a backup application. Software compatibility information is available at: www.tandbergdata.com.

3 — Perform a backup. For questions regarding software installation, conguration, or operation (including how to

perform a backup) — contact your software provider.

Note: 1) Driver installation may not be necessary and depends on the backup application that you use in your

system. Refer to the installation instructions for your backup application for verication.

2) You can congure the library for a customized operation to t your particular needs.

See the Product Manual at www.tandbergdata.com.

1 2 3 4 5 6 7 8

Commentaires sur ces manuels

Pas de commentaire

Tandberg Data 2U LTO Manuel d'utilisateur Page 5

Commentaires sur ces manuels